[ 0.000000] Linux version 4.15.18-10-pve (
[email protected]) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PVE 4.15.18-32 (Sat, 19 Jan 2019 10:09:37 +0100) ()
[ 0.000000] Command line: BOOT_IMAGE=/ROOT/
[email protected]/boot/vmlinuz-4.15.18-10-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000963ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000096400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d6000-0x00000000000dbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ff5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ff60000-0x000000003ff68fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ff69000-0x000000003ff7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003ff80000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Supermicro X7DA8/X7DA8, BIOS 2.1c 07/04/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3ff60 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 1023M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 2 lose cover RAM: 0G
[ 0.000000] found SMP MP-table at [mem 0x000f6150-0x000f615f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 90000 size 24576
[ 0.000000] BRK [0x1ad44000, 0x1ad44fff] PGTABLE
[ 0.000000] BRK [0x1ad45000, 0x1ad45fff] PGTABLE
[ 0.000000] BRK [0x1ad46000, 0x1ad46fff] PGTABLE
[ 0.000000] BRK [0x1ad47000, 0x1ad47fff] PGTABLE
[ 0.000000] BRK [0x1ad48000, 0x1ad48fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33af1000-0x35d6ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6120 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x000000003FF62705 00005C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x000000003FF68E48 000074 (v01 INTEL TUMWATER 06040000 PTL 00000003)
[ 0.000000] ACPI: DSDT 0x000000003FF64AEE 00435A (v01 Intel BLAKFORD 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 0x000000003FF69FC0 000040
[ 0.000000] ACPI: APIC 0x000000003FF68EBC 000090 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x000000003FF68F4C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x000000003FF68F88 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SPCR 0x000000003FF68FB0 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000003FF63FD4 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x000000003FF63F2E 0000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x000000003FF63E88 0000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x000000003FF63DE2 0000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x000000003FF63D3C 0000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x000000003FF63C96 0000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x000000003FF63BF0 0000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x000000003FF63B4A 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x000000003FF62761 0013E9 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003ff5ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x3ff35000-0x3ff5ffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000003ff5ffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000095fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ff5ffff]
[ 0.000000] Reserved but unavailable: 267 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ff5ffff]
[ 0.000000] On node 0 totalpages: 261877
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3989 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4030 pages used for memmap
[ 0.000000] DMA32 zone: 257888 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec81000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00096000-0x00096fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d6000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x511 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257762
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/ROOT/
[email protected]/boot/vmlinuz-4.15.18-10-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 966780K/1047508K available (12300K kernel code, 2480K rwdata, 4288K rodata, 2420K init, 2416K bss, 80728K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39754 entries in 156 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: Fast TSC calibration using PIT
[ 0.028000] tsc: Detected 2000.157 MHz processor
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.31 BogoMIPS (lpj=8000628)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.028000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.028000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.028000] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.028000] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.028000] mce: CPU supports 6 MCE banks
[ 0.028000] process: using mwait in idle threads
[ 0.028000] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.028000] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.028000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.028000] Speculative Store Bypass: Vulnerable
[ 0.028000] Freeing SMP alternatives memory: 36K
[ 0.036000] smpboot: CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0x6)
[ 0.036000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.036000] core: PEBS disabled due to CPU errata
[ 0.036000] ... version: 2
[ 0.036000] ... bit width: 40
[ 0.036000] ... generic registers: 2
[ 0.036000] ... value mask: 000000ffffffffff
[ 0.036000] ... max period: 000000007fffffff
[ 0.036000] ... fixed-purpose events: 3
[ 0.036000] ... event mask: 0000000700000003
[ 0.036000] Hierarchical SRCU implementation.
[ 0.036000] smp: Bringing up secondary CPUs ...
[ 0.036000] x86: Booting SMP configuration:
[ 0.036000] .... node #0, CPUs: #1
[ 0.004000] smpboot: CPU 1 Converting physical 3 to logical package 1
[ 0.041251] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.116163] #2 #3
[ 0.122031] smp: Brought up 1 node, 4 CPUs
[ 0.122031] smpboot: Max logical packages: 2
[ 0.122031] smpboot: Total of 4 processors activated (16001.54 BogoMIPS)
[ 0.124323] devtmpfs: initialized
[ 0.124323] x86/mm: Memory block size: 128MB
[ 0.124472] evm: security.selinux
[ 0.124473] evm: security.SMACK64
[ 0.124474] evm: security.SMACK64EXEC
[ 0.124475] evm: security.SMACK64TRANSMUTE
[ 0.124476] evm: security.SMACK64MMAP
[ 0.124477] evm: security.apparmor
[ 0.124478] evm: security.ima
[ 0.124479] evm: security.capability
[ 0.124542] PM: Registering ACPI NVS region [mem 0x3ff69000-0x3ff7ffff] (94208 bytes)
[ 0.124542] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.124542] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.124542] pinctrl core: initialized pinctrl subsystem
[ 0.124542] RTC time: 8:06:41, date: 04/05/19
[ 0.124542] NET: Registered protocol family 16
[ 0.124601] audit: initializing netlink subsys (disabled)
[ 0.124613] audit: type=2000 audit(1554451601.124:1): state=initialized audit_enabled=0 res=1
[ 0.128018] cpuidle: using governor ladder
[ 0.128018] cpuidle: using governor menu
[ 0.128046] Simple Boot Flag at 0x38 set to 0x1
[ 0.128059] ACPI: bus type PCI registered
[ 0.128061] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.128161] PCI: MMCONFIG for domain 0000 [bus 00-08] at [mem 0xe0000000-0xe08fffff] (base 0xe0000000)
[ 0.128165] PCI: MMCONFIG at [mem 0xe0000000-0xe08fffff] reserved in E820
[ 0.128179] PCI: Using configuration type 1 for base access
[ 0.130309] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.130309] ipmi:dmi: Invalid IPMI type: 0
[ 0.130309] ACPI: Added _OSI(Module Device)
[ 0.130309] ACPI: Added _OSI(Processor Device)
[ 0.130309] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.130309] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130309] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.130309] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.130309] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.132004] ACPI: Dynamic OEM Table Load:
[ 0.132004] ACPI: SSDT 0xFFFF9FD0FD82C000 000518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.132439] ACPI: Dynamic OEM Table Load:
[ 0.132446] ACPI: SSDT 0xFFFF9FD0FD942840 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.136012] ACPI: Dynamic OEM Table Load:
[ 0.136012] ACPI: SSDT 0xFFFF9FD0FD942F00 000085 (v01 PmRef Cpu2Cst 00003000 INTL 20050228)
[ 0.136012] ACPI: Dynamic OEM Table Load:
[ 0.136012] ACPI: SSDT 0xFFFF9FD0FD942B40 000085 (v01 PmRef Cpu3Cst 00003000 INTL 20050228)
[ 0.136012] ACPI: Interpreter enabled
[ 0.136012] ACPI: (supports S0 S1 S4 S5)
[ 0.136012] ACPI: Using IOAPIC for interrupt routing
[ 0.136012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136012] ACPI: Enabled 9 GPEs in block 00 to 1F
[ 0.145008] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.145018] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.145025] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.145039] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-08] only partially covers this bridge
[ 0.146338] PCI host bridge to bus 0000:00
[ 0.146342] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.146344] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.146346] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.146349] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.146351] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.146353] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]
[ 0.146356] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.146371] pci 0000:00:00.0: [8086:25c0] type 00 class 0x060000
[ 0.146434] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.146554] pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
[ 0.146606] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.146728] pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
[ 0.146779] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.146900] pci 0000:00:04.0: [8086:25fa] type 01 class 0x060400
[ 0.146951] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.147072] pci 0000:00:08.0: [8086:1a38] type 00 class 0x088000
[ 0.147087] pci 0000:00:08.0: reg 0x10: [mem 0xd2600000-0xd26003ff 64bit]
[ 0.147134] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.147242] pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
[ 0.147362] pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
[ 0.148005] pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
[ 0.148143] pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
[ 0.148264] pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
[ 0.148385] pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
[ 0.148505] pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
[ 0.148631] pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
[ 0.148676] pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
[ 0.148812] pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
[ 0.148857] pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
[ 0.148993] pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
[ 0.149038] pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
[ 0.149169] pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
[ 0.149214] pci 0000:00:1d.3: reg 0x20: [io 0x1860-0x187f]
[ 0.149358] pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
[ 0.149380] pci 0000:00:1d.7: reg 0x10: [mem 0xd2600400-0xd26007ff]
[ 0.149464] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.149579] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.149760] pci 0000:00:1e.2: [8086:2698] type 00 class 0x040100
[ 0.149778] pci 0000:00:1e.2: reg 0x10: [io 0x1c00-0x1cff]
[ 0.149787] pci 0000:00:1e.2: reg 0x14: [io 0x1880-0x18bf]
[ 0.149795] pci 0000:00:1e.2: reg 0x18: [mem 0xd2600c00-0xd2600dff]
[ 0.149804] pci 0000:00:1e.2: reg 0x1c: [mem 0xd2600800-0xd26008ff]
[ 0.149850] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.149965] pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
[ 0.150054] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.150170] pci 0000:00:1f.2: [8086:2682] type 00 class 0x010400
[ 0.150188] pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7]
[ 0.150197] pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7]
[ 0.150205] pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef]
[ 0.150214] pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3]
[ 0.150222] pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.150230] pci 0000:00:1f.2: reg 0x24: [mem 0xd2601000-0xd26013ff]
[ 0.150268] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.150372] pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
[ 0.150428] pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f]
[ 0.150613] pci 0000:01:00.0: [10de:01df] type 00 class 0x030000
[ 0.150630] pci 0000:01:00.0: reg 0x10: [mem 0xd1000000-0xd1ffffff]
[ 0.150641] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.150653] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd0ffffff 64bit]
[ 0.150667] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.150761] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.150769] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.150774] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.150779] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.150862] pci 0000:02:00.0: [8086:3500] type 01 class 0x060400
[ 0.150936] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.151030] pci 0000:02:00.3: [8086:350c] type 01 class 0x060400
[ 0.151103] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[ 0.151184] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.151193] pci 0000:00:03.0: PCI bridge to [bus 02-07]
[ 0.151197] pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
[ 0.151200] pci 0000:00:03.0: bridge window [mem 0xd2200000-0xd23fffff]
[ 0.151291] pci 0000:03:00.0: [8086:3510] type 01 class 0x060400
[ 0.151373] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.151458] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.151471] pci 0000:03:02.0: [8086:3518] type 01 class 0x060400
[ 0.151553] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[ 0.151633] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.151661] pci 0000:02:00.0: PCI bridge to [bus 03-06]
[ 0.151665] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
[ 0.151669] pci 0000:02:00.0: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.151757] pci 0000:04:00.0: [8086:032c] type 01 class 0x060400
[ 0.151763] pci 0000:04:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.151851] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.151941] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.151949] pci 0000:03:00.0: PCI bridge to [bus 04-05]
[ 0.152049] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.152133] pci 0000:06:00.0: [8086:1096] type 00 class 0x020000
[ 0.152157] pci 0000:06:00.0: reg 0x10: [mem 0xd2200000-0xd221ffff]
[ 0.152177] pci 0000:06:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.152274] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.152360] pci 0000:06:00.1: [8086:1096] type 00 class 0x020000
[ 0.152385] pci 0000:06:00.1: reg 0x10: [mem 0xd2220000-0xd223ffff]
[ 0.152404] pci 0000:06:00.1: reg 0x18: [io 0x3020-0x303f]
[ 0.152500] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 0.152576] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.152587] pci 0000:03:02.0: PCI bridge to [bus 06]
[ 0.152591] pci 0000:03:02.0: bridge window [io 0x3000-0x3fff]
[ 0.152595] pci 0000:03:02.0: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.152721] pci 0000:02:00.3: PCI bridge to [bus 07]
[ 0.152790] pci 0000:08:00.0: [9005:0285] type 00 class 0x010400
[ 0.152813] pci 0000:08:00.0: reg 0x10: [mem 0xd2000000-0xd21fffff 64bit]
[ 0.152850] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.152901] pci 0000:08:00.0: supports D1
[ 0.168016] pci 0000:00:04.0: PCI bridge to [bus 08]
[ 0.168021] pci 0000:00:04.0: bridge window [mem 0xd2000000-0xd21fffff]
[ 0.168104] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[ 0.168115] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.168117] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.168119] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.168121] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.168124] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.168126] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff window] (subtractive decode)
[ 0.168606] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.168722] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.168836] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.168949] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.169063] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.169177] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.169291] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.169406] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.172005] SCSI subsystem initialized
[ 0.172027] libata version 3.00 loaded.
[ 0.172049] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.172049] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.172049] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.172049] vgaarb: loaded
[ 0.172072] ACPI: bus type USB registered
[ 0.172095] usbcore: registered new interface driver usbfs
[ 0.172107] usbcore: registered new interface driver hub
[ 0.172146] usbcore: registered new device driver usb
[ 0.172201] EDAC MC: Ver: 3.0.0
[ 0.172201] PCI: Using ACPI for IRQ routing
[ 0.172201] PCI: pci_cache_line_size set to 64 bytes
[ 0.172201] e820: reserve RAM buffer [mem 0x00096400-0x0009ffff]
[ 0.172201] e820: reserve RAM buffer [mem 0x3ff60000-0x3fffffff]
[ 0.172299] NetLabel: Initializing
[ 0.172300] NetLabel: domain hash size = 128
[ 0.172301] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.172327] NetLabel: unlabeled traffic allowed by default
[ 0.172357] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.172357] hpet clockevent registered
[ 0.172357] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.172357] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.172357] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.176053] clocksource: Switched to clocksource hpet
[ 0.199321] VFS: Disk quotas dquot_6.6.0
[ 0.199359] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.199586] AppArmor: AppArmor Filesystem Enabled
[ 0.199639] pnp: PnP ACPI init
[ 0.200159] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.200162] system 00:00: [io 0x0295-0x0296] has been reserved
[ 0.200165] system 00:00: [io 0x0ca0-0x0ca1] has been reserved
[ 0.200168] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.200170] system 00:00: [io 0x1180-0x11bf] has been reserved
[ 0.200173] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.200176] system 00:00: [io 0xfe00] has been reserved
[ 0.200179] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.200182] system 00:00: [mem 0xfee00000-0xfee0ffff] could not be reserved
[ 0.200185] system 00:00: [mem 0xfec80000-0xfec80fff] has been reserved
[ 0.200187] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.200190] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.200193] system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
[ 0.200202] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.200329] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.200630] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.200689] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.201113] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.201516] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.202168] pnp 00:06: [dma 3]
[ 0.202361] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.202384] pnp: PnP ACPI: found 7 devices
[ 0.209896] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.209973] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[ 0.209976] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[ 0.209979] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.209984] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.209987] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.209993] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.210005] pci 0000:03:00.0: PCI bridge to [bus 04-05]
[ 0.210016] pci 0000:03:02.0: PCI bridge to [bus 06]
[ 0.210019] pci 0000:03:02.0: bridge window [io 0x3000-0x3fff]
[ 0.210024] pci 0000:03:02.0: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.210031] pci 0000:02:00.0: PCI bridge to [bus 03-06]
[ 0.210034] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
[ 0.210039] pci 0000:02:00.0: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.210047] pci 0000:02:00.3: PCI bridge to [bus 07]
[ 0.210057] pci 0000:00:03.0: PCI bridge to [bus 02-07]
[ 0.210060] pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
[ 0.210063] pci 0000:00:03.0: bridge window [mem 0xd2200000-0xd23fffff]
[ 0.210070] pci 0000:08:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.210073] pci 0000:08:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 0.210075] pci 0000:00:04.0: PCI bridge to [bus 08]
[ 0.210079] pci 0000:00:04.0: bridge window [mem 0xd2000000-0xd21fffff]
[ 0.210087] pci 0000:00:1e.0: PCI bridge to [bus 09]
[ 0.210099] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.210102] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.210104] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.210106] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
[ 0.210109] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window]
[ 0.210111] pci_bus 0000:00: resource 9 [mem 0x40000000-0xfebfffff window]
[ 0.210113] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
[ 0.210115] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.210118] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.210120] pci_bus 0000:02: resource 1 [mem 0xd2200000-0xd23fffff]
[ 0.210122] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.210124] pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd22fffff]
[ 0.210127] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.210129] pci_bus 0000:06: resource 1 [mem 0xd2200000-0xd22fffff]
[ 0.210131] pci_bus 0000:08: resource 1 [mem 0xd2000000-0xd21fffff]
[ 0.210134] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7 window]
[ 0.210136] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff window]
[ 0.210138] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.210140] pci_bus 0000:09: resource 7 [mem 0x000dc000-0x000dffff window]
[ 0.210143] pci_bus 0000:09: resource 8 [mem 0x000e0000-0x000e3fff window]
[ 0.210145] pci_bus 0000:09: resource 9 [mem 0x40000000-0xfebfffff window]
[ 0.210261] NET: Registered protocol family 2
[ 0.210698] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.210747] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.210824] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.210899] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.210911] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.210993] NET: Registered protocol family 1
[ 0.214281] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 0.214303] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.214311] PCI: CLS mismatch (32 != 64), using 64 bytes
[ 0.214319] pci 0000:04:00.0: rerouting interrupts for [8086:032c]
[ 0.214394] Unpacking initramfs...
[ 1.028387] Freeing initrd memory: 35324K
[ 1.028636] Scanning for low memory corruption every 60 seconds
[ 1.029681] Initialise system trusted keyrings
[ 1.029698] Key type blacklist registered
[ 1.029812] workingset: timestamp_bits=36 max_order=18 bucket_order=0
[ 1.032413] zbud: loaded
[ 1.033286] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.033553] fuse init (API version 7.26)
[ 1.035872] Key type asymmetric registered
[ 1.035874] Asymmetric key parser 'x509' registered
[ 1.035935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.035999] io scheduler noop registered
[ 1.036016] io scheduler deadline registered (default)
[ 1.036066] io scheduler cfq registered
[ 1.036926] intel_idle: does not run on family 6 model 15
[ 1.037068] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[ 1.037084] ACPI: Power Button [PWRB]
[ 1.037145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.037181] ACPI: Power Button [PWRF]
[ 1.037391] Monitor-Mwait will be used to enter C-1 state
[ 1.039101] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.059575] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.080106] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.083334] Linux agpgart interface v0.103
[ 1.086225] loop: module loaded
[ 1.086661] libphy: Fixed MDIO Bus: probed
[ 1.086663] tun: Universal TUN/TAP device driver, 1.6
[ 1.086717] PPP generic driver version 2.4.2
[ 1.086787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.086791] ehci-pci: EHCI PCI platform driver
[ 1.087235] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.087244] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.087259] ehci-pci 0000:00:1d.7: debug port 1
[ 1.091172] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.091198] ehci-pci 0000:00:1d.7: irq 17, io mem 0xd2600400
[ 1.104016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.104083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.104086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.104088] usb usb1: Product: EHCI Host Controller
[ 1.104091] usb usb1: Manufacturer: Linux 4.15.18-10-pve ehci_hcd
[ 1.104093] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.104250] hub 1-0:1.0: USB hub found
[ 1.104261] hub 1-0:1.0: 8 ports detected
[ 1.104534] ehci-platform: EHCI generic platform driver
[ 1.104548] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.104552] ohci-pci: OHCI PCI platform driver
[ 1.104568] ohci-platform: OHCI generic platform driver
[ 1.104577] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.104926] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.104934] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.104941] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.104960] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800
[ 1.105018] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.105020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.105023] usb usb2: Product: UHCI Host Controller
[ 1.105025] usb usb2: Manufacturer: Linux 4.15.18-10-pve uhci_hcd
[ 1.105027] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.105166] hub 2-0:1.0: USB hub found
[ 1.105175] hub 2-0:1.0: 2 ports detected
[ 1.105646] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.105653] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.105660] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.105687] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 1.105743] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.105745] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.105748] usb usb3: Product: UHCI Host Controller
[ 1.105750] usb usb3: Manufacturer: Linux 4.15.18-10-pve uhci_hcd
[ 1.105752] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.105902] hub 3-0:1.0: USB hub found
[ 1.105911] hub 3-0:1.0: 2 ports detected
[ 1.106365] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.106378] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.106385] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.106411] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 1.106471] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.106473] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.106475] usb usb4: Product: UHCI Host Controller
[ 1.106477] usb usb4: Manufacturer: Linux 4.15.18-10-pve uhci_hcd
[ 1.106479] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.106615] hub 4-0:1.0: USB hub found
[ 1.106624] hub 4-0:1.0: 2 ports detected
[ 1.107102] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.107110] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.107117] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.107147] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 1.107204] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.107207] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.107209] usb usb5: Product: UHCI Host Controller
[ 1.107211] usb usb5: Manufacturer: Linux 4.15.18-10-pve uhci_hcd
[ 1.107213] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.107347] hub 5-0:1.0: USB hub found
[ 1.107355] hub 5-0:1.0: 2 ports detected
[ 1.107574] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.109945] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.109998] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.110136] mousedev: PS/2 mouse device common for all mice
[ 1.110335] rtc_cmos 00:01: RTC can wake from S4
[ 1.110460] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.110485] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.110496] i2c /dev entries driver
[ 1.110502] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 1.110615] device-mapper: uevent: version 1.0.3
[ 1.110712] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised:
[email protected]
[ 1.110780] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.111354] NET: Registered protocol family 10
[ 1.116098] Segment Routing with IPv6
[ 1.116123] NET: Registered protocol family 17
[ 1.116144] Bridge firewalling registered
[ 1.116189] Key type dns_resolver registered
[ 1.116559] RAS: Correctable Errors collector initialized.
[ 1.116612] microcode: sig=0x6f6, pf=0x4, revision=0xd2
[ 1.116677] microcode: Microcode Update Driver: v2.2.
[ 1.116691] sched_clock: Marking stable (1116670318, 0)->(1573467692, -456797374)
[ 1.116963] registered taskstats version 1
[ 1.116993] Loading compiled-in X.509 certificates
[ 1.117018] zswap: loaded using pool lzo/zbud
[ 1.120883] Key type big_key registered
[ 1.120889] Key type trusted registered
[ 1.122696] Key type encrypted registered
[ 1.122700] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.122705] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.122710] ima: Allocated hash algorithm: sha1
[ 1.122734] evm: HMAC attrs: 0x1
[ 1.123124] Magic number: 15:273:118
[ 1.123283] rtc_cmos 00:01: setting system clock to 2019-04-05 08:06:42 UTC (1554451602)
[ 1.123449] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.123450] EDD information not available.
[ 1.127966] Freeing unused kernel memory: 2420K
[ 1.156030] Write protecting the kernel read-only data: 20480k
[ 1.157252] Freeing unused kernel memory: 2008K
[ 1.164471] Freeing unused kernel memory: 1856K
[ 1.174870] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.174871] x86/mm: Checking user space page tables
[ 1.185134] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.209684] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.209854] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.209872] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.269080] pps_core: LinuxPPS API ver. 1 registered
[ 1.269082] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
[email protected]>
[ 1.269412] PTP clock support registered
[ 1.269833] e1000e: loading out-of-tree module taints kernel.
[ 1.271368] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.1.1-NAPI
[ 1.271369] e1000e: Copyright(c) 1999 - 2018 Intel Corporation.
[ 1.271582] Adaptec aacraid driver 1.2.1[50877]-custom
[ 1.271609] aacraid 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.271647] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.280745] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.284121] ahci 0000:00:1f.2: version 3.0
[ 1.284561] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports ? Gbps 0x3f impl RAID mode
[ 1.284565] ahci 0000:00:1f.2: flags: 64bit led
[ 1.285668] scsi host1: ahci
[ 1.285838] scsi host2: ahci
[ 1.292027] scsi host3: ahci
[ 1.292204] scsi host4: ahci
[ 1.292372] scsi host5: ahci
[ 1.296913] scsi host6: ahci
[ 1.332347] e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:30:48:79:98:26
[ 1.332350] e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.332429] e1000e 0000:06:00.0 eth0: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
[ 1.332678] e1000e 0000:06:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.340081] aacraid: Comm Interface enabled
[ 1.388095] e1000e 0000:06:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:30:48:79:98:27
[ 1.388098] e1000e 0000:06:00.1 eth1: Intel(R) PRO/1000 Network Connection
[ 1.388176] e1000e 0000:06:00.1 eth1: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
[ 1.389747] e1000e 0000:06:00.1 enp6s0f1: renamed from eth1
[ 1.408150] e1000e 0000:06:00.0 enp6s0f0: renamed from eth0
[ 1.549026] random: fast init done
[ 1.584000] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 1.596136] random: crng init done
[ 1.596138] random: 7 urandom warning(s) missed due to ratelimiting
[ 1.610242] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.610266] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.610290] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.610313] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.610329] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.610854] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[ 1.610857] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.610868] ata3.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[ 1.610870] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.611538] ata1.00: configured for UDMA/133
[ 1.611550] ata3.00: configured for UDMA/133
[ 1.611725] scsi 1:0:0:0: Direct-Access ATA ST3250410AS C PQ: 0 ANSI: 5
[ 1.612045] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.612073] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.612092] sd 1:0:0:0: [sda] Write Protect is off
[ 1.612095] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.612139] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.612236] scsi 3:0:0:0: Direct-Access ATA ST3250410AS C PQ: 0 ANSI: 5
[ 1.612495] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.612505] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.612524] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.612527] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.612567] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.614231] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.646634] sda: sda1 sda2 sda3
[ 1.647076] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.663891] sdb: sdb1 sdb2 sdb3
[ 1.664282] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.761016] usb 2-1: New USB device found, idVendor=0566, idProduct=3002
[ 1.761020] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.765499] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.806413] usbcore: registered new interface driver usbhid
[ 1.806416] usbhid: USB HID core driver
[ 1.807532] input: HID 0566:3002 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:0566:3002.0001/input/input5
[ 1.864195] hid-generic 0003:0566:3002.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:1d.0-1/input0
[ 1.864354] usbcore: registered new interface driver usbkbd
[ 1.864633] input: HID 0566:3002 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:0566:3002.0002/input/input6
[ 1.924182] hid-generic 0003:0566:3002.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:1d.0-1/input1
[ 1.952537] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 1.952583] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G O 4.15.18-10-pve #1
[ 1.952584] Hardware name: Supermicro X7DA8/X7DA8, BIOS 2.1c 07/04/2011
[ 1.952586] Call Trace:
[ 1.952589] <IRQ>
[ 1.952598] dump_stack+0x63/0x8b
[ 1.952603] __report_bad_irq+0x35/0xc0
[ 1.952605] note_interrupt+0x234/0x280
[ 1.952608] handle_irq_event_percpu+0x54/0x80
[ 1.952610] handle_irq_event+0x3b/0x60
[ 1.952612] handle_fasteoi_irq+0x7d/0x130
[ 1.952615] handle_irq+0x20/0x30
[ 1.952617] do_IRQ+0x4e/0xd0
[ 1.952620] common_interrupt+0x84/0x84
[ 1.952621] </IRQ>
[ 1.952624] RIP: 0010:mwait_idle+0x69/0x190
[ 1.952626] RSP: 0018:ffffae34401fbe78 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[ 1.952628] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[ 1.952630] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1.952631] RBP: ffffae34401fbe90 R08: 0000000000000000 R09: 0000000000000002
[ 1.952632] R10: ffffae34401fbe08 R11: 0000000000000232 R12: 0000000000000001
[ 1.952634] R13: ffffffffb5e5fae0 R14: ffff9fd0fe352b00 R15: 0000000000000000
[ 1.952639] arch_cpu_idle+0x15/0x20
[ 1.952641] default_idle_call+0x23/0x30
[ 1.952644] do_idle+0x17b/0x200
[ 1.952646] cpu_startup_entry+0x73/0x80
[ 1.952650] start_secondary+0x1ab/0x200
[ 1.952653] secondary_startup_64+0xa5/0xb0
[ 1.952655] handlers:
[ 1.952692] [<00000000423f9039>] usb_hcd_irq
[ 1.952727] Disabling IRQ #16
[ 2.043983] tsc: Refined TSC clocksource calibration: 2000.070 MHz
[ 2.043992] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd47074491, max_idle_ns: 440795259574 ns
[ 2.339975] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 2.535989] usb 3-1: New USB device found, idVendor=046d, idProduct=c03e
[ 2.535992] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.535994] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 2.535996] usb 3-1: Manufacturer: Logitech
[ 2.552473] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:046D:C03E.0003/input/input7
[ 2.552620] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 2.553579] usbcore: registered new interface driver usbmouse
[ 3.068111] clocksource: Switched to clocksource tsc
[ 151.707991] raid6: sse2x1 gen() 3102 MB/s
[ 151.755973] raid6: sse2x1 xor() 3289 MB/s
[ 151.803978] raid6: sse2x2 gen() 5278 MB/s
[ 151.851978] raid6: sse2x2 xor() 4018 MB/s
[ 151.899977] raid6: sse2x4 gen() 5994 MB/s
[ 151.947980] raid6: sse2x4 xor() 4465 MB/s
[ 151.947981] raid6: using algorithm sse2x4 gen() 5994 MB/s
[ 151.947982] raid6: .... xor() 4465 MB/s, rmw enabled
[ 151.947983] raid6: using ssse3x2 recovery algorithm
[ 151.948784] xor: measuring software checksum speed
[ 151.987972] prefetch64-sse: 7579.000 MB/sec
[ 152.027972] generic_sse: 6759.000 MB/sec
[ 152.027973] xor: using function: prefetch64-sse (7579.000 MB/sec)
[ 152.041122] Btrfs loaded, crc32c=crc32c-generic
[ 162.243286] SPL: Loaded module v0.7.12-1
[ 162.243426] znvpair: module license 'CDDL' taints kernel.
[ 162.243427] Disabling lock debugging due to kernel taint
[ 163.930058] ZFS: Loaded module v0.7.12-1, ZFS pool version 5000, ZFS filesystem version 5
[ 181.547976] aacraid: aac_fib_send: first asynchronous command timed out.
Usually a result of a PCI interrupt routing problem;
update mother board BIOS or consider utilizing one of
the SAFE mode kernel options (acpi, apic etc)
[ 196.208527] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 196.256686] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 196.276105] systemd[1]: Detected architecture x86-64.
[ 196.276407] systemd[1]: Set hostname to <pve>.
[ 197.305418] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 197.305928] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 197.306274] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 197.307511] systemd[1]: Created slice System Slice.
[ 197.308110] systemd[1]: Created slice system-getty.slice.
[ 197.308206] systemd[1]: Listening on udev Control Socket.
[ 197.309599] systemd[1]: Mounting POSIX Message Queue File System...
[ 197.496812] systemd-journald[514]: Received request to flush runtime journal from PID 1
[ 197.506797] Loading iSCSI transport class v2.0-870.
[ 197.536320] RPC: Registered named UNIX socket transport module.
[ 197.536323] RPC: Registered udp transport module.
[ 197.536324] RPC: Registered tcp transport module.
[ 197.536325] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 197.538701] iscsi: registered transport (tcp)
[ 197.605172] iscsi: registered transport (iser)
[ 197.921371] intel_rng: FWH not detected
[ 197.927053] i5k_amb i5k_amb.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 197.966525] parport_pc 00:06: reported by Plug and Play ACPI
[ 197.966623] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 198.171480] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 198.237000] Error: Driver 'pcspkr' is already registered, aborting...
[ 198.432629] coretemp coretemp.0: Using relative temperature scale!
[ 198.432814] coretemp coretemp.1: Using relative temperature scale!
[ 198.432843] coretemp coretemp.0: Using relative temperature scale!
[ 198.432867] coretemp coretemp.1: Using relative temperature scale!
[ 198.529576] intel_powerclamp: No package C-state available
[ 198.560572] intel_powerclamp: No package C-state available
[ 198.604560] intel_powerclamp: No package C-state available
[ 198.636750] ppdev: user-space parallel port driver
[ 319.092611] Netfilter messages via NETLINK v0.30.
[ 319.594812] audit: type=1400 audit(1554451920.964:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=850 comm="apparmor_parser"
[ 320.165399] audit: type=1400 audit(1554451921.536:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=851 comm="apparmor_parser"
[ 320.166177] audit: type=1400 audit(1554451921.536:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=851 comm="apparmor_parser"
[ 320.167068] audit: type=1400 audit(1554451921.536:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=851 comm="apparmor_parser"
[ 320.167949] audit: type=1400 audit(1554451921.536:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=851 comm="apparmor_parser"
[ 320.245179] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 320.457294] new mount options do not match the existing superblock, will be ignored
[ 361.547987] aac_fib_free, XferState != 0, fibptr = 0x00000000fb77cd1f, XferState = 0x800812ad
[ 361.548254] aacraid: probe of 0000:08:00.0 failed with error -110
[ 361.548416] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 361.548574] EDAC MC0: Giving out device to module i5000_edac.c controller I5000: DEV 0000:00:10.0 (POLLED)
[ 361.548603] EDAC PCI0: Giving out device to module i5000_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
[ 361.595917] gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
[ 361.596360] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 361.660959] vmbr0: port 1(enp6s0f1) entered blocking state
[ 361.660964] vmbr0: port 1(enp6s0f1) entered disabled state
[ 361.661094] device enp6s0f1 entered promiscuous mode
[ 361.761721] nouveau 0000:01:00.0: NVIDIA G72 (046f00a3)
[ 361.832833] IPv6: ADDRCONF(NETDEV_UP): vmbr0: link is not ready
[ 361.884003] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 60907 usecs (2934 samples)
[ 361.884007] snd_intel8x0 0000:00:1e.2: clocking to 48000
[ 361.961248] nouveau 0000:01:00.0: bios: version 05.72.22.43.00
[ 361.962352] nouveau 0000:01:00.0: fb: 256 MiB DDR2
[ 362.640583] [TTM] Zone kernel: Available graphics memory: 504212 kiB
[ 362.640586] [TTM] Initializing pool allocator
[ 362.640594] [TTM] Initializing DMA pool allocator
[ 362.640624] nouveau 0000:01:00.0: DRM: VRAM: 252 MiB
[ 362.640626] nouveau 0000:01:00.0: DRM: GART: 512 MiB
[ 362.640632] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[ 362.640634] nouveau 0000:01:00.0: DRM: TMDS table script pointers not stubbed
[ 362.640636] nouveau 0000:01:00.0: DRM: DCB version 3.0
[ 362.640640] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[ 362.640644] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011310 00000028
[ 362.640646] nouveau 0000:01:00.0: DRM: DCB outp 02: 01011312 00000000
[ 362.640649] nouveau 0000:01:00.0: DRM: DCB outp 03: 020223f1 00c0c080
[ 362.640651] nouveau 0000:01:00.0: DRM: DCB conn 00: 0000
[ 362.640654] nouveau 0000:01:00.0: DRM: DCB conn 01: 1130
[ 362.640656] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210
[ 362.640658] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211
[ 362.640660] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213
[ 362.640915] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 362.688317] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 362.688319] [drm] Driver supports precise vblank timestamp query.
[ 362.691574] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 362.691589] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
[ 362.800164] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo 00000000be5afcd8
[ 362.801348] fbcon: nouveaufb (fb0) is primary device
[ 362.928365] nouveau 0000:01:00.0: DRM: 0xD4A0: Parsing digital output script table
[ 363.085599] Console: switching to colour frame buffer device 160x64
[ 363.087960] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 363.100035] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 363.420772] audit: type=1400 audit(1554451964.792:7): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=1209 comm="apparmor_parser"
[ 363.426393] e1000e: enp6s0f1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 363.426511] e1000e 0000:06:00.1 enp6s0f1: Link Speed was downgraded by SmartSpeed
[ 363.426514] e1000e 0000:06:00.1 enp6s0f1: 10/100 speed: disabling TSO
[ 363.426946] vmbr0: port 1(enp6s0f1) entered blocking state
[ 363.426952] vmbr0: port 1(enp6s0f1) entered forwarding state
[ 363.427106] IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready
[ 363.450056] audit: type=1400 audit(1554451964.820:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=1231 comm="apparmor_parser"
[ 363.450069] audit: type=1400 audit(1554451964.820:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-cgns" pid=1231 comm="apparmor_parser"
[ 363.450075] audit: type=1400 audit(1554451964.820:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=1231 comm="apparmor_parser"
[ 363.450079] audit: type=1400 audit(1554451964.820:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=1231 comm="apparmor_parser"
[ 371.616338] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 371.735859] ip_set: protocol 6